Table of Contents
Advertisement
3. download program
After editing and saving the program, users need to download them to XMP. Before downloading,
ensure the XMP has connected with computer successfully. (Please refer to chapter 1-3-2 for cable
connection ).
Click
to open software serial port configuration
Choose the correct serial port, baud rate and parity or click "check" to choose these parameters
automatically.
When below window shows "connect to PLC succeeded", it means the connecting is successful.
Click OK to continue.
If the connecting is not successful, the window will show "communication error". Please check
the serial port and the cable.
After connecting successfully, click
to download the PLC program. If the PLC is running, it
will pop up the stop running window, click OK to continue downloading.
Advertisement
Table of Contents
