Motion - HIKVISION DS-2CC12D5S-IT3 User Manual


NEG.IMAGE
You can set the NEG IMAGE as ON or OFF, and if you set it as on, the
bright area and the dark area of the image are reversed.

3.8.3 Motion

In the user-defined motion detection surveillance area, the moving
object can be detected and the alarm will be triggered.
Set a Motion Detection Area:
Steps:
Move the cursor to SELECT and select a motion area. Four areas
1.
are selectable.
Move the cursor to DISPLAY, set it ON and press OK to enter the
2.
motion detection edit interface.
Move the joystick up/down/left/right to define the position of the
3.
selected motion area.
HD-SDI IR Bullet Camera·User Manual
MOTION
1. SELECT
2. DISPLAY
3. SENSITIVITY
4. MOTION VIEW
5. DEFAULT
6. RETURN
Figure 3-16 Motion Detection
AREA 1
ON
----|---- 30
ON

RET
37