HIKVISION DS-2CC12D5S-IT3 User Manual page 34

Steps:
Move the cursor to ←or →, and press OK to decide the character
1.
position on the dotted line.
Move the cursor to select the needed characters, numbers, and
2.
symbols.
Press OK to confirm. The selected character will be displayed on
3.
the dotted line below.
Move the cursor to POS to edit the camera title position on the
4.
screen.
Move the cursor to POS.
1).
Press OK to enter the CAM TITLE position setting interface.
2).
Move the joystick up/down/left/right to change the position of
3).
camera title.
Press OK to exit the CAM TITLE position setting interface, and
4).
return to the CAM TITLE menu.
HD-SDI IR Bullet Camera·User Manual
CAM TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K
L M N O P Q R S T U V
W X Y Z ▶ → ←↑↓( )
¯ - _ ■ / = & : ~ , .
← → CLR POS END
C A M E R A 0 1 _ _ _
Figure 3-12 CAM Title
33