Privacy - HIKVISION DS-2CC12D5S-IT3 User Manual

Press OK to enter the area size configuration interface after the
4.
position is defined.
Move the joystick up/down/left/right to define the size of the
5.
selected area.
Press OK to confirm the size configuration and select RET to return
6.
to the motion menu, and select AGAIN to try again.
(Optional)Move the cursor to DEFAULT and press OK to restore the
7.
motion settings to the default.

SENSITIVITY
It refers to the sensitivity of the motion detection, which ranges from
0 to 60. And the higher sensitivity causes the better response of the
detection.

MOTION VIEW
Motion view enables a better visual judgment when the motion is
detected. Set the motion view ON, once motion occurred; you can
see the transparent red mosaic flickering to show the exact location
where the motion occurs. Or you can set it OFF to disable the motion
view.

3.8.4 Privacy

The privacy mask allows you to cover certain areas which you don't
want to be viewed or recorded. Up to 8 privacy areas are
configurable.
HD-SDI IR Bullet Camera·User Manual
38