Steps:
Move the cursor to POS/SIZE, and press OK to enter the position
1.
and size configuration interface.
Move the joystick up/down/right/left to define the position of the
2.
defog area.
Press OK again to switch the position configuration to the size
3.
configuration.
Move the joystick up/down/right/left to define the size of the
4.
defog area.
Press OK and select RET to return to the defog menu or select
5.
AGAIN to re-define the position and size.
(Optional) Move the cursor to DEFAULT and press OK to restore
6.
the defog settings to the default.
Low, middle and high are selectable for the defog gradation.
Enabling the defog function will increase the contrast of the image. It
is recommended that the defog function is set to OFF during the
normal environment.
3.4 Backlight
Backlight is applicable for the backlight or the high luminance
environment; you can set the Backlight to OFF, BLC, and HSBLC.
HD-SDI IR Bullet Camera·User Manual
24