Factory Mode Adjustments; Entering Factory Mode; How To Access Service Mode - Samsung LN32A550P3F Service Manual

4-3. Factory Mode Adjustments

4-3-1 Entering Factory Mode

To enter 'Service Mode' Press the remote -control keys in this sequence :
- If you do not have Factory remote - control
Power OFF

4-3-2 How to Access Service Mode

Using the Customer Remote
1. Turn the power off and set to stand-by mode
2. Press the remote buttons in this order; POWER OFF-MUTE-1-8-2-POWER ON to turn the set on.
3. The set turns on and enters service mode. This may take approximately 20 seconds.
4. Press the Power button to exit and store data in memory.
- If you fail to enter service mode, repeat steps 1 and 2 above.
5. Initial SERVICE MODE DISPLAY State
ADC
ADC Target
ADC Result
Option Byte
White Balance
W/B Movie
EPA Standard
Video/Scaler
Enhancement
SOUND
Dynamic Contrast
LNA+
Hotel Option
EDID
Expert Setting
- "T-TULPUS0-0025" and "T-TULPAUS5-C007" are firmware.......
MUTE 1
Expert D-Settings
Expert Gray Scale
Expert C-Space
Expert Others
CHECKSUM
VisualTEST
Font Data Viewer
T-PRLAUSC-0038
T-PRLAUSM-0017
MTK-DRV 2.0.25.0
RFS : T-PRLAUS-20071127
2007-12-07
PANEL : 46AM
LN46A550P1FXZA
EDID Success
Option :
0311 1110 5120 8000 0c18
0010 0000 00
DTP-COMP-0052
DTP-LM-0064
Date of purchase : 12/9/2007
8 2
0x0000
4. Troubleshooting
Power On
4-29