Factory Mode Adjustments - Samsung LA32C550J1F Service Manual

4-3. Factory Mode Adjustments

4-3-1 Entering Factory Mode
To enter 'Service Mode' Press the remote -control keys in this sequence :
- If you do not have Factory remote - control
Power OFF INFO
4-3-2 How to Access Service Mode
Using the Customer Remote
1. Turn the power off and set to stand-by mode.
2. Press the remote buttons in this order; POWER OFF- INFO - MENU - MUTE to turn the set on.
3. The set turns on and enters service mode. This may take approximately 20 seconds.
4. Press the Power button to exit and store data in memory.
- If you fail to enter service mode, repeat steps 1 and 2 above.
5. Initial SERVICE MODE DISPLAY State
Option
Control
SVC
Expert
ADC/WB
Advanced
T-TDT5DCNC-XXXX
T-TDT5DCNS-XXXX
EDID SUCCESS
CABLIB : AV X COMP X PC X HDMI X
Option : XXXX XXXX XXX
SDAL-XXXX
RFS : P0220 T-TDT5DCNC
2010-01-31
Type : 32A1AFOC
Model : LA32C550
MAC SUCCESS
Factory Data Ver : XXX
EERC Version : XXX
DTP-AP-COMP-XXX
DIP-HIG-XXXX
DTP-BP-XXXX-XX
Date of purchase : XX/XX/XXXX
* How to enter the hidden factory mode.
a. into the factory mode
b. move the tap to Advanced
c. key input : 0 + 0 + 0 + 0
** hidden menu : Advanced
6. Buttons operations withn Service Mode
Menu Full Menu Display/Move to Parent Menu
Item Selection by Moving the Cursor
Direction Keys /
Data Increase / Decrease for the Selected Item
Direction Keys /
Source
Cycles through the active input source that are connected to the unit
All manuals and user guides at all-guides.com
MENU MUTE
4. Troubleshooting
4-27