Factory Mode Adjustments - Samsung UA40B6000VR Service Manual

4-3. Factory Mode Adjustments

4-3-1 Entering Factory Mode
To enter 'Service Mode' Press the remote -control keys in this sequence :
- If you do not have Factory remote - control
Power OFF
4-3-2 How to Access Service Mode
Using the Customer Remote
1. Turn the power off and set to stand-by mode
2. Press the remote buttons in this order; POWER OFF-MUTE-1-8-2-POWER ON to turn the set on.
3. The set turns on and enters service mode. This may take approximately 20 seconds.
4. Press the Power button to exit and store data in memory.
- If you fail to enter service mode, repeat steps 1 and 2 above.
5. Initial SERVICE MODE DISPLAY State
Mode: CDTV . RES : 480I
Option
ADC/WB
Control
Expert
Advanced
6. Buttons operations withn Service Mode
Menu
Direction Keys /
Direction Keys /
Source
INFO MENU
T-CHELEU-****
T-CHU5AEAC-****
T-CHU5DEUS-****
SDAL-4.2.27-0139
RFS:24_64_256-24 T-CHU5DEUC
2009-**-**
Type : 40A1UFOE
Model: UA**B6000
MAC SUCCESS
EDID SUCCESS
CALIB : AV O COMP O PC 0 HDMI O
Option : 0751 a015 280
Factory Data Ver : 489
DTP-AP-COMP-116
DTP-HIIG-0111-1
DTP-BP-0119
Date of purchase : **/**/****
Full Menu Display/Move to Parent Menu
Item Selection by Moving the Cursor
Data Increase / Decrease for the Selected Item
Cycles through the active input source that are connected to the unit
MUTE Power On
4. Troubleshooting
4-21