Installation - Miele G 7859 Operating Instructions Manual

Installation

Please refer to the installation
diagram supplied with the machine.
The machine must be installed
correctly and levelled.
Any uneveness in the floor level can be
compensated for and the height of the
machine raised or lowered by adjusting
the four screw feet.
The machine can be installed in the
following ways:
– Freestanding:
– Slot-in or at the end of a row:
The machine can be installed adjacent
to other equipment or furniture or in a
recess at least 60 cm wide and 60 cm
deep.
– Building under:
The machine should be positioned
under a continuous worktop or sink
drainer.
The niche must be at least 60 cm wide,
60 cm deep and 82 cm high.
If necessary the machine lid can be
removed as follows:
44
^ Open the door.
^ Remove the fixing screws on the left
and right hand sides using a cross
slotted screwdriver.
^ Pull the machine lid approx. 5 mm
forwards, lift upwards and remove.
^ To protect the underside of the
worktop against water ingress, the
protective foil (25 x 58 cm,
self-adhesive) should be stuck under
the worktop in the area of the steam
condenser.