Table of Contents
Advertisement
memory. The number of steps can be defined under "EDIT" and the scenes can
be called up under "Run." To run the scenes see page 30.
Editing procedure 2: Using an external controller.
1.
Call up the first scene in your controller now.
2.
Select "SC01" by pressing the UP or DOWN buttons.
3.
Press MODE/ESC, the display shows "SC01".
4.
Press MODE/ESC, the display shows "C-01".
5.
Select "CEDT" by pressing the UP or DOWN buttons.
6.
Press MODE/ESC, the display shows "OFF".
7.
Press UP, the display will read "ON".
8.
Press MODE/ESC, the display shows "SC02". You successfully downloaded
the first scene.
9.
Adjust the Step-time as described above.
10. Call up the second scene in your controller now.
11. Repeat steps 5-11 until all desired scenes are downloaded.
12.
Press MODE/ESC to exit. The number of steps can be defined under "STEP"
and the scenes can be called up under "RUN."
RUN
- This function allows you to "RUN" the user-installed program. You can set the
number of steps under Step (S-01- S-48). You can edit the individual scenes under Edit.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "RUN" is displayed, press ENTER.
4. The display will show "ON/OFF".
5. Press the UP button to display "ON" to activate this function, or "OFF" to
deactivate this function.
6. Press MODE/ESC to return to the main menu.
©Elation Professional, Los Angeles Ca.
35
E SPOT LED™
www.ElationLighting.com
Advertisement
Table of Contents
