JVC SR- DVM600U Instructions Manual page 63

Cancel The Finalization Of A DVD-RW Disc
1
Load a DVD-RW disc to cancel the disc finalization, and
perform steps 1 – 2 of AFinalize A DVD-R/RW DiscB (A pg. 62)
before continuing.
2
Press selection keys to select AHDD/DVD SET UPB, then
press G.
3
Press selection keys to select ADISC SET UPB, then press G.
4
Press selection keys to select
ACANC. FINALIZ.B, then press
ENTER.
5
Press selection keys to select
AOKB, then press ENTER.
6
Upon completing cancellation
of finalization,
ACANCELLATION
COMPLETEDB appears on the
TV screen. Press ENTER to end.
7
Press SET UP to return to the normal screen.
●
When the disc finalization is canceled, the mode in which the
disc was formatted is restored, making the disc recordable.
(A pg. 9, 61)
NOTE:
It is not possible to cancel the finalization of a DVD-R disc.
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP
HDD SET UP DVD SET UP DISC SET UP DV SET UP
FINALIZE CANC. FINALIZ.
Video
FORMAT
SET UP ENTER SELECT WITH @
THEN PRESS [ENTER]
EXIT SELECT
PRESS [SET UP] TO EXIT
Direct Access To ADISC SET UPB Screen
When you wish to finalize or cancel the finalization of a disc,
besides accessing the ADISC SET UPB screen through the
SET UP button, you can also use the F2 button on the remote
control. This F2 button enables you to access the ADISC SET UPB
screen directly after loading the disc.
To finalize a disc
A Load the disc.
B Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
C Press F2 to access the ADISC SET UPB screen.
●
The screen in step 8 of AFinalize A DVD-R/RW DiscB
(A pg. 62) appears.
D Perform steps 8 – 11 of AFinalize A DVD-R/RW DiscB
(A pg. 62) to finalize the disc.
To cancel finalization
A Perform steps A – C of ATo finalize a discB above.
●
The screen in step 4 of ACancel The Finalization Of A DVD-RW
DiscB on the left column appears.
B Perform steps 4 – 7 of ACancel The Finalization Of A DVD-RW
DiscB on the left column to cancel finalization of the disc.
NOTES:
●
The direct access (F2) function works only when in the HDD or
DVD deck mode, on the condition that the Main Menu, Editing,
Library Database Navigation or Dubbing screen is not displayed.
●
The direct access (F2) function will not work in the following
cases, and an operation prohibition mark A
TV screen.
●
During DVD recording or playback.
●
Disc is not loaded.
●
A playback-only disc is loaded.
●
Disc reading in progress.
●
Disc information acquisition failure when DVD-RAM is loaded.
●
When this unit is in the DV deck mode or when dubbing is in
progress, the direct access (F2) function will also not work.
However, A B will not be displayed.
SUBSIDIARY SETTINGS
EN
B appears on the
63