Simulated Surround Effect; Time Search - JVC SR- DVM600U Instructions Manual

0-9
CANCEL
ENTER
S
I
CLEAR

Time Search

You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a program (DVD-RAM,
DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc (Video CD/
SVCD and Audio CD).
1
Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select Aj9B, then press ENTER.
The pop-up window appears under the selected item.
TITLE 99 CHAPTER 99
DVD-
VIDEO
3
Press the number keys to enter the time, then press ENTER.
Playback starts from the specified time.
Example:
To play back from a point 12 (minutes): 50 (seconds) elapsed.
TIME
Press 1
TIME
Press 5
TIME
If you have specified a wrong selection,
Press RETURN on the remote control and repeat the above
procedures from step 2.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
●
When A7B is displayed on the TV screen in step 3, you have
selected a point that exceeds the recording time of the disc.
However, for HDD; DVD-R/RW (Video mode) discs that have not
been finalized; and DVD-R/RW (VR mode) discs, A7B will not be
displayed and the last image (still) of the program appears on the
TV screen.
●
Some DVD VIDEO discs do not contain time information, and it is
not possible to use the Time Search function. In such cases, A7B
is displayed on the TV screen as well.
●
This function is not possible for a Video CD/SVCD with PBC
function.
TV DVD
Selection Keys
FGDE
RETURN
T
ON SCREEN
EACH 0:00
CINEMA AUTO
TIME
Press 2
TIME
Press 0
BASIC OPERATIONS ON DVD DECK

Simulated Surround Effect

It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your 2-
channel stereo system.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select A
3
Press selection keys to select AONB, then press ENTER.
●
A3D-ONB appears above the selected item and Simulated
Surround Effect is activated.
TITLE 99 CHAPTER 99
DVD-
VIDEO
To clear the on-screen bar
Press ON SCREEN.
To cancel the simulated surround effect
Press selection keys to select AOFFB, then press ENTER to clear
A3D-ONB from the screen.
NOTES:
●
Simulated Surround Effect works correctly only when playing
back a title recorded in multichannels.
●
Simulated Surround Effect does not affect the DVD VIDEO
bitstream signal from the [DIGITAL AUDIO OUTPUT] connectors.
●
When Simulated Surround Effect is activated, the settings of
AANALOG AUDIO OUTB and AD. RANGE CONTROLB are
disabled. (A pg. 58)
●
Simulated Surround Effect cannot be activated under the
following conditions:
When the HDD deck is in the recording mode.
●
When a disc containing both the Dolby Digital 5.1CH and 2CH
●
sound formats is playing back a scene that is not in the 5.1CH
sound format.
Adjusting The Picture Quality
You can obtain optimal picture quality by selecting an appropriate
picture mode.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select A
pop-up window appears under the selected item.
TITLE 99 CHAPTER 99
DVD-
VIDEO
3
Press selection keys to select the desired option, then press
ENTER.
NORMAL
:
Normally select this option.
CINEMA
:
Suitable for a movie disc, etc.
SHARP
:
Clearer, sharper-edged picture when viewing images with lots
of flat, same-colored surfaces such as cartoons.
SOFT
:
Select this option when too much noise appears.
To clear the on-screen bar
Press ON SCREEN.
EN
B, then press ENTER.
EACH 0:00
CINEMA AUTO
OFF
ON
B, then press ENTER. The
EACH 0:00
CINEMA AUTO
29