Video In/Out - JVC SR- DVM600U Instructions Manual

SUBSIDIARY SETTINGS
60
EN

VIDEO IN/OUT

MONITOR TYPE 4:3LB
^
8
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs. For
details, refer to AMonitor SetB (A pg. 21).
FRONT AUX F-1 VIDEO
^
8
Select the appropriate mode depending on the connector (F-1)
being used on the front panel.
VIDEO
:
To use the [VIDEO] input connector on the front panel.
S-VIDEO:
To use the [S-VIDEO] input connector on the front panel.
REAR AUX L-1 VIDEO
^
8
Select the appropriate mode depending on the connector (L-1)
being used on the rear panel.
VIDEO
:
To use the [VIDEO INPUT] connector on the rear panel.
S-VIDEO:
To use the [S-VIDEO INPUT] connector on the rear panel.
/ 4:3PS / 16:9AUTO / 16:9FIX
/ S-VIDEO
/ S-VIDEO
NOTE:
To display the ADV SET UPB menu, press SET UP while in the
DV deck mode.
DV SET UP
DV AUDIO REC 12BIT
^
8
This is the setting for sound mode before recording on a Mini DV
tape.
12BIT
:
Enables Audio Dubbing later.
16BIT
:
Audio Dubbing is not possible but the recorded sound quality is
.
higher than A12BITB
AUDIO MODE SOUND1
^
8
You can select the desired sound mode when playing back an
audio dubbed Mini DV tape.
SOUND1
:
Original recorded sound.
SOUND2
:
Audio dubbed sound.
MIX
:
Original recorded sound and audio-dubbed sound.
NOTES:
●
When AAUDIO MODEB is set to AMIXB, both the main and sub
audio will be audible for bilingual tapes.
●
To select only the main audio or only the sub audio of bilingual
tapes, set AAUDIO MODEB to ASOUND1B.
/ 16BIT
/ SOUND2 / MIX