Led Codes - Motorola RFS6000 Series Installation Manual

3.1.1 Start Up / POST (Primary System or Redundant System)
System Status 1 LED
Off
Green Blinking
Green Solid
Green Solid
Amber Blinking
Alternating Green Blinking
& Amber Blinking
NOTE
3.1.2 Switch Status (Primary System)
System Status 1 LED
Off
Green Solid
Green Solid
Green Solid
3.1.3 Switch Status (Redundant System)
System Status 1 LED
Off
Green Solid
System Status 2 LED
Off
Green Blinking
Green Blinking
Off
Off
Alternating Green Blinking
& Amber Blinking
During switch start up, the Temperature status LED will be lit Solid
Amber. This is normal behavior and does not indicate an error. At the
completion of start up the Temperature Status LED will switch to Solid
Green.
System Status 2 LED
Off
Off
Green Solid
Amber Blinking
System Status 2 LED
Off
Off
Event
Power off
Power On Self Test (POST) running
POST succeeded (Operating System Loading)
POST succeeded (Normal Operation)
POST Failure
Boot Up Error: Device has an invalid checksum
Event
Power off
No Redundancy Feature Enabled
Redundancy Feature Enabled
Actively Adopting Access Ports
No License to adopt Access Ports
or
No Country Code configured on the switch
or
License and Country Code configured, but no
APs adopted
Event
Power off
No Redundancy Feature Enabled

LED Codes

5