Surround & Trim Kit Installation - Quadra-Fire 41I-ACC User Manual

E. Surround & Trim Kit Installation
1. Lay surround face down on a protected surface to pre-
vent scratching.
2. Using a Phillips head screw driver attach the side sur-
rounds to the top surround using 2 #8 sheet metal screws
provided with the kit. Figure 19.1
3. Lay the trim face down and place the corner brackets into
position.
4. Using a standard flat screw driver tighten the corner
brackets. Figure 19.2.
5. Slide the trim over the surround set.
6. Install the surround set and trim set to the outer can.
Place the hook in the surround sides over the surround
attachment screws, 2 on each side. Figure 19.3.
7. Place top on top of appliance.
STOVE TOP
Figure 19.3
October 14, 2013
Figure 19.1
Figure 19.2
7045-910
Secure 2 Side Surrounds to
Top Surround
Corner Brackets
SURROUND
ATTACH POINTS
41I-ACC
19