Isofix Mountings - CITROEN DS3 Owner's Handbook Manual

"ISOFIX" mountings
Your vehicle has been approved in accordance
with the new ISOFIX regulation .
The seats, represented below, are fitted with
regulation ISOFIX mountings:
There are three rings for each seat:
- two rings A , located between the vehicle
seat back and cushion, indicated by a label,
- a ring B , behind the seat, referred to as the
TOP TETHER for fixing the upper strap.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with
two latches which are secured on the
two rings A .
When fitting an ISOFIX child seat to the right
hand rear seat, before fixing the seat in place,
first move the centre rear seat belt towards the
middle of the vehicle so as to not interfere with
the operation of the seat belt.
Some seats also have an upper strap which is
attached to ring B .
To attach this strap, raise the vehicle seat's
head restraint then pass the hook between its
rods. Then fix the hook on ring B and tighten
the upper strap.
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
For information regarding the ISOFIX child
seats which can be installed in your vehicle,
refer to the table showing the locations for
installing ISOFIX child seats.