Isofix Mountings - CITROEN Jumpy Multispace Owner's Handbook Manual

"ISOFIX" MOUNTINGS
Your vehicle has been approved to the latest
ISOFIX regulation.
If fitted on your vehicle, the regulation
ISOFIX mountings are located by labels.
The mountings comprise three rings for each
seat:
- two front rings A , located between the
vehicle seat backrest and cushion,
indicated by an "ISOFIX" marking,
- a rear ring B , located behind the
vehicle's seat, called the Top Tether, for
securing the upper strap, indicated by a
"Top Tether" marking.
The Top Tether is sued to secure the upper
strap of child seats that have one. In the
event of a front impact, this system limits the
forward tipping of the child seat.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in
your vehicle.
The ISOFIX child seats are fitted with two
latches which are secured on the two front
rings A .
Some also have an upper strap which is
attached to the rear ring B .
To secure the child seat to the Top Tether:
- remove and stow the head restraint
before installing a child seat on this seat
(refit it once the child seat has been
removed),
- pass the child seat upper strap over the
top of the seat backrest, between the
apertures for the head restraint rods,
- fix the hook on the end of the upper
strap to the rear ring B ,
- tighten the upper strap.
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
Observe strictly the fitting instructions
provided with the child seat.
For information on the possibilities for
installing ISOFIX child seats in your
vehicle, refer to the summary table.
Child safety
4