Isofix Child Seats - CITROEN C1 2015 Handbook

Child safety
"ISOFIX" mountings
Your vehicle has been approved in accordance
with the latest ISOFIX regulation.
The seats, represented below, are fitted with
regulation ISOFIX mountings:
There are three anchorages for each seat:
- two anchorages A, located between the
vehicle seat back and cushion, indicated by
a marking,
130
- an anchorage B behind the seat for
fixing the upper strap, referred to as the
Top Tether.
It is identified by a marking.
The top tether is used to secure the upper strap
of child seats that have one. This arrangement
limits the forward tipping of the child seat in the
event of a front impact.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with
two latches which are secured on the two
anchorages A.
Some seats also have an upper strap,
known as the Top Tether, which is attached to
anchorage B.
To secure the child seat to the top tether:
- remove and stow the head restraint before
installing the child seat in this seating
position (refit it once the child seat has
been removed),
- pass the strap of the child seat over the
top of the seat backrest, between the
apertures for the head restraint rods,
- fix the hook of the upper strap to the
anchorage B,
- tighten the upper strap.
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
Follow the instructions for fitting
child seats contained in the seat
manufacturer's installation guide.
For information on the possibilities for installing
ISOFIX child seats in your vehicle, refer to the
summary table.