Table of Contents
Advertisement
ISOFIX mountings (child
seats)
(The legislation on carrying children is specific
to each country. Refer to the legislation in force
in your country.)
ISOFIX is an ISO standard for child seat
mountings (ISO standard 13216-1: 1999).
This system avoids the use of the vehicle's seat
belts for securing the child seat: two latches
on the child seat engage on two anchorage
points (1) positioned between the seat cushion
and backrest at the left-hand and right-hand
seating positions of the rear bench seat of your
E-MEHARI.
The aim of the ISOFIX system is to facilitate
the installation of a child seat and its transfer
to another vehicle, while avoiding the problems
inherent in fixing systems that use the vehicle's
seat belts.
Your E-MEHARI is fitted with ISOFIX
mountings at the left-hand and right-hand
seating positions of the rear bench seat.
This system simplifies the installation and fixing
of a child seat while improving the safety of the
installation at the same time.
(1) Locations of ISOFIX mountings.
(1) Location of the Top Tether rings for fixing
the upper strap.
https://www.automotive-manuals.net/
The ISOFIX standard is overseen by the
International Standards Organisation.
Always use child seats compatible with
this standard when using the dedicated
anchorage points.
Using a child seat incompatible with the
ISOFIX standard may increase the risks
of an accident and injury for the child, but
also for other occupants of the vehicle.
Installation of a child
seat compatible with the
ISOFIX standard
Failure to observe the instructions and
warnings related to the installation of
a child seat or child restraint system would
expose the child and the other occupants
of the vehicle to the risk of serious injury in
the event of a collision or sudden braking.
Always use child seats that meet the
European standards and carefully follow
the installation and fixing instructions
provided with the child seat.
Safety
5
47
Advertisement
Table of Contents
