Timer Recording; On-Screen Timer Programming - JVC HI-FI HR-J642U Instructions Manual

30
EN
On-Screen
Timer
Programming
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
1
¶
2
q 5/8
1 2
3
4 5 6
NUMBER
7 8 9
NUMBER "9"
0
MENU
OK
3 ¡
7 8
You can directly program the VCR's timer to record up to 8
shows, as far as a year in advance. Remember, the clock must be
set before you can program the timer (
LOAD A CASSETTE
1
Make sure the record safety tab is intact. If not, cover
the hole with adhesive tape, then load.
The VCR comes on, and the counter is reset,
automatically.
ACCESS ON-SCREEN
MENU
2
Press MENU.
ACCESS PROGRAM SET
SCREEN
2
3
Make sure the highlight bar (arrow) is on "PROGRAM
6
SET", then press OK.
SELECT PROGRAM NUMBER
4
Press the appropriate
NUMBER keys or CH5 ∞ to
select a vacant program
number, then press OK. The
first time you set the timer
programming function, all
the program numbers will
be blank; in this case just
press OK when the Program
Set screen appears.
SET PROGRAM
INFORMATION
5
Press the appropriate NUMBER keys to set the date,
start/stop time and channel number. Press CH5 ∞ to set
AM/PM and tape speed (SP or EP). Press OK after AM/
PM, channel number and tape speed settings.
Any information comprised of 1 digit (except the
channel number) should have a "0" entered before it.
It is possible to set all information using the CH 5 ∞
button.
(In this case, press OK after each setting.) Do not use
the CH ∞ button to set the date.
At the Program Set screen, the setting that can be set
blinks. When setting of a highlighted item is completed,
the highlight bar moves down by 1 line to the next item.
NOTE:
If you are using a cable box or a DBS receiver, enter the
cable box or DBS receiver channel, not the channel to
be recorded. The channel to be recorded must be
selected on the cable box or DBS receiver. (The cable
box or DBS receiver channel is the VCR's channel that
displays the channels received by the cable box or DBS
receiver.)
** You can record selected programs at the same time
every weekday, or once a week. Before entering the
month, press NUMBER key "8" (DAILY) or "9"
(WEEKLY). Either "DAILY" or "WEEKLY" appears.
Press again and "DAILY" or "WEEKLY" disappears.
For weekly recording, the desired date for the day of
the week must be entered.

TIMER RECORDING

pg. 7 or 9).
PROGRAM 1
DATE – –/– –
START – –:– – AM
STOP – –:– – AM
CHANNEL
PRESS NUMBER KEY (O–9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
– – SP