JVC HI-FI HR-J642U Instructions Manual page 31

1
4
7 8
0
TIMER
CH
1 3
¶ 7
2 2
q 5/8 6
2
3
5 6
9
MENU
OK
¡
8
MAKE CORRECTIONS
6
To change any of the settings, press OK or SEARCH
TY until the item you want to change begins
blinking. Then set as in step 5.
RETURN TO NORMAL
SCREEN
7
Press MENU as many times as necessary.
Press just once to access the Auto Timer screen
( pg. 33).
ENGAGE TIMER MODE
8
Press TIMER. The VCR turns off automatically.
NOTES:
To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.
In case of a power failure after programming, the VCR's memory
backup keeps your selections for approximately 10 minutes.
If you select "PROGRAM SET" without having set the date and
time, an error message appears. Follow its instructions.
If you enter a start time that has already passed, "ERROR"
appears on the screen and blinks.
Programs that start after midnight must have the next day's date.
After timer recording is completed, the VCR's power goes off
automatically.
You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
If the end of tape is reached during timer recording, the
cassette is automatically ejected.
When timer-recording cable or satellite channels through an
external tuner, be sure to keep the cable box or satellite
receiver's power ON.
EXAMPLE
If you program the VCR to timer
record a show on December 24
on channel 40 from 12:00 noon
to 1:00 PM in SP mode, the
screen will look like this:
31
EN
PROGRAM 1
DATE 12/24 WED
START 12:00 PM
STOP 1:00 PM
CHANNEL 40 SP
PRESS NUMBER KEY (O–9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END