Format A Disc (Dvd Deck Only) - JVC LPT1029-001A Instructions Manual

Format A Disc (DVD Deck Only)

Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
ATTENTION:
●
When a disc is formatted, all recordings and data are erased. It
is impossible to restore them.
●
Never turn off the unit or disconnect the mains power cord
while ANOW FORMATTING...B is displayed on the TV screen.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
●
Load a DVD-RAM/RW disc to format.
ENTER
CABLE/SAT
TV DVD
Selection Keys
FGDE
SET UP
Format A DVD-RAM Disc
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AHDD/DVD SET UPB, then
press G.
3
Press selection keys
to select ADISC SET
UPB, then press G.
4
Press selection keys
to select AFORMATB,
then press ENTER.
Press selection keys
to select AOKB, then
press ENTER.
5
Press selection keys
to select AEXECUTEB,
then press ENTER.
Format A DVD-RW Disc
1
Perform steps 1 to 3 of AFormat A DVD-RAM DiscB as above
before continuing.
2
Press selection keys to select AFORMATB, then press ENTER.
Press selection keys to choose AVR MODEB or AVIDEO
MODEB, then press ENTER when ADISC WILL BE
FORMATTEDB appears on the TV screen.
AVR MODEB:
To be chosen when you want to record, erase, or edit data on
the disc repeatedly.
AVIDEO MODEB:
To be chosen when you want to erase all the data on the disc
once played back to record new data, or play back the disc on
other DVD players.
3
Press selection keys to select AEXECUTEB, then press
ENTER.
NOTES:
●
It is impossible to format Version 1.0 DVD-RW discs in Video
mode.
●
It is impossible to format DVD-R discs.
●
All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles. (A pg. 54)
SUBSIDIARY SETTINGS
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
HDD SET UP DVD SET UP DISC SET UP
FINALISE CANC. FINALIS.
Video
FORMAT
SELECT WITH @ THEN PRESS [ENTER]
SET UP ENTER
PRESS [SET UP] TO EXIT
EXIT SELECT
79
EN
INITIAL SET UP