Format A Disc (Dvd Deck Only) - JVC DR-MH30S Instructions Manual

SUBSIDIARY SETTINGS
74
EN

Format A Disc (DVD Deck Only)

Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
ATTENTION:
● When a disc is formatted, all recordings and data are erased. It is
impossible to restore them.
● Never turn off the unit or disconnect the mains power cord while
"NOW FORMATTING..." is displayed on the TV screen.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Load a DVD-RAM/RW disc to format.
ENTER
CABLE/SAT
TV DVD
rtwe
SET UP
Format A DVD-RAM Disc
1
Press SET UP to access the Main Menu screen.
2
Press w e to select "HDD/DVD SET UP", then press t.
3
Press w e to select "DISC SET
UP", then press t.
4
Press rt w e to select
"FORMAT", then press ENTER.
Press w e to select "OK", then
press ENTER.
5
Press w e to select "OK", then
press ENTER.
Format A DVD-RW Disc
1
Perform steps 1 to 3 of "Format A DVD-RAM Disc" on the above
before continuing.
2
Press rt w e to select "FORMAT", then press ENTER. Press
w e to choose "VR MODE" or "VIDEO MODE", then press ENTER
when "DISC WILL BE FORMATTED" appears on the TV screen.
"VR MODE": To be chosen when you want to record, erase, or
edit data on the disc repeatedly.
"VIDEO MODE": To be chosen when you want to erase all the data
on the disc once played back to record new data,
or play back the disc on other DVD players.
3
Press w e to select "OK", then press ENTER.
NOTES:
● It is impossible to format Version 1.0 DVD-RW discs in Video mode.
● It is impossible to format DVD-R discs.
● All the titles on a disc will be deleted once the disc is formatted even if
they are protected titles. (
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
HDD SET UP DVD SET UP DISC SET UP
FINALIZE CANC. FINALIS.
Video
FORMAT
SET UP ENTER
SELECT WITH [ ] THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT SELECT
pg. 51)
INITIAL SET UP