Table of Contents
Advertisement
16
EN
Auto Set Up
The Auto Set Up simplifies installation by guiding you
through the procedures of setting the clock and tuner
channels — simply follow the on-screen menus that appear.
INITIAL SETTINGS (cont.)
Before starting, make sure of the following:
The TV aerial cable should be connected to the unit.
The unit's mains power cord should be connected to a
mains outlet.
The "Video Channel Set" (
and the TV should be set to its AV mode (with AV or
S-VIDEO connection
connection
pg. 12).
Slide the TV/S-VHS/DVD switch to the right.
A
Turn on the unit.
Press 1 on the unit or remote control. The Clock Set
screen appears on the TV screen.
B
Set the time.
Press rt to set the hour,
then press OK or e.
Press and hold rt to change
the time by 30 minutes.
C
Set the date.
Press rt to set the date, then press OK or e.
Press and hold rt to change the date by 15 days.
D
Set the year.
Press rt to set the year, then press SET UP MENU.
Press and hold rt to change the year by 1 year.
pg. 15) should be performed
pg. 12) or UHF channel (with RF
CLOCK SET
TIME
DATE
0 : 00
01.01
[ / ]
[MENU] : EXIT
YEAR
03
Advertisement
Table of Contents
