Table of Contents
Advertisement
14
EN
Component Video Connection
(DVD deck only)
ATTENTION
Be sure to connect the unit's VIDEO OUT or S VIDEO OUT connector to the TV's VIDEO IN or S-VIDEO IN
connector.
Back of TV
Aerial connector
Mains power
Back of unit
8 To connect to a TV with COMPONENT VIDEO IN
connectors . . .
A
Connect the unit to TV.
A Connect the aerial, unit and TV as per "AV
Connection" or "S-VIDEO Connection".
(
pg. 12, 13)
B Connect the unit's COMPONENT VIDEO OUT
connectors to the TV's COMPONENT VIDEO IN
connectors.
C Connect the unit's AUDIO OUT connectors to the TV's
AUDIO IN connectors.
AUDIO IN connectors
COMPONENT VIDEO IN connector
Component Video cable
Mains outlet
cord
INSTALLING YOUR NEW UNIT (cont.)
(not provided)
COMPONENT
VIDEO OUT
RF cable (provided)
B
Connect the unit to mains.
Plug the end of the mains power cord into a mains outlet.
NOTES:
You can obtain high-quality component video pictures.
If your TV is not stereo-capable, use the unit's AUDIO OUT
connectors to connect to an audio amplifier for Hi-Fi stereo
sound reproduction.
For switching the TV's mode, refer to the instruction manual of
your television.
After the connection is completed, perform "Video
Channel Set" on page 15.
Audio cable
(not provided)
AUDIO OUT
TV aerial
cable
Advertisement
Table of Contents
