Table of Contents
Advertisement
Scan Mode Set
(DVD deck)
This unit supports the progressive scan system (eg. 480p*)
as well as the conventional interlaced scan system (eg.
480i*).
If your TV equipped with component video connectors
supports the progressive video input, you can enjoy a
high quality picture by setting the progressive scan mode
to active.
Refer also to the instruction manuals supplied with your TV.
If your TV equipped with component video connectors does
not support the progressive video input, do not change the
scan mode to the "PROGRESSIVE" or "FILM".
* 480p and 480i indicate the number of scanning lines and
scanning format of an image signal.
• 480p indicates 480 scanning lines with progressive format.
• 480i indicates 480 scanning lines with interlaced format.
You can select the progressive mode according to the
picture type (film or video source). This takes effect only
when Progressive mode is selected as the scanning mode.
(
"ATTENTION" below)
ATTENTION
How to change the Scan mode
Press and hold DVD PICTURE for more than 3
seconds, to change the scan mode between
Progressive and Interlace mode.* When DVD colour
system is set to "PAL" (
the progressive mode.
* The Scan Mode indicator lights up as described below.
Green : in the Interlace mode
Red : in the Progressive mode
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/S-VHS/DVD switch to the right.
A
Turn on the unit.
Press 1.
B
Select the DVD deck.
On the unit
Press S-VHS/DVD repeatedly so that the DVD indicator
lights up.
On the remote control
Press DVD so that the DVD indicator lights up.
pg. 18), you cannot select
C
Access the DVD Set Up menu screen.
A Press SET UP MENU.
B Press w e to select
"
PICTURE".
D
Select the mode.
Press rt to move 0 to
"PROGRESSIVE MODE",
then press OK.
E
Select the mode setting.
Press rt to select the desired setting.
F
Return to the normal screen.
Press SET UP MENU.
* The default setting is bold in the table below.
8 PROGRESSIVE MODE
VIDEO:
Suitable for playing back a video
source disc.
FILM:
Suitable for playing back a film or
progressive source disc.
AUTO:
Used to play a disc containing both
video and film source materials.
This unit recognizes the picture
type (film or video source) of the
current disc according to the disc
information.
If the playback picture is unclear or noisy, or the
oblique lines of the picture are rough, try to change to
other modes.
19
EN
PICTURE
MONITOR TYPE
4:3LB
PROGRESSIVE MODE
AUTO
SCREEN SAVER
ON
MP3 / JPEG
MP3
SELECT
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP MENU].
OK
PICTURE
MONITOR TYPE
4:3LB
PROGRESSIVE MODE
AUTO
ON
SCREEN SAVER
MP3 / JPEG
MP3
SELECT
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP MENU].
OK
Advertisement
Table of Contents
