Table of Contents
Advertisement
10
EN
Component Video Connection
(DVD deck)
ATTENTION
Be sure to connect the unit's VIDEO OUT or S VIDEO OUT connector to the TV's VIDEO IN or S-VIDEO IN connector.
Back of TV
Aerial connector
Mains outlet
Mains
power cord
Back of unit
8To connect to a TV with COMPONENT VIDEO IN
connectors . . .
A
Connect the unit to TV.
A Connect the aerial, unit and TV as per "AV
Connection" or "S-VIDEO Connection". (
B Connect the unit's COMPONENT VIDEO OUT
connectors to the TV's COMPONENT VIDEO IN
connectors.
C Connect the unit's AUDIO OUT connectors to the
TV's AUDIO IN connectors.
B
Connect the unit to mains.
Plug the end of the mains power cord into a mains outlet.
AUDIO IN connectors
COMPONENT VIDEO IN connector
Component Video cable
(not provided)
DVD
pg. 12,13)
INSTALLING YOUR NEW UNIT (cont.)
S Video cable
(not provided)
COMPONENT
VIDEO OUT
RF cable (provided)
NOTES:
● You can obtain high-quality component video pictures.
● If your TV is not stereo-capable, use the unit's AUDIO OUT
connectors to connect to an audio amplifier for Hi-Fi stereo
sound reproduction.
● For switching the TV's mode, refer to the instruction manual of
your television.
● By using the component video connection, you can view the
images in the progressive mode. For switching to the
progressive mode, refer to "Scan Mode Set (DVD deck)"
(
pg. 11).
After the connection is completed, perform "Video
Channel Set" on page 13.
Audio cable
(not provided)
TV aerial
cable
INPUT
(L-1)
S VIDEO
Y
VIDEO
VIDEO
P
B
AUDIO
AUDIO
AUDIO
P
R
OUTPUT
COMPONENT
OUTPUT
VIDEO OUT
DVD/VCR
DVD
AUDIO OUT
Advertisement
Table of Contents
