Advertisement
W
iring diagram
Fig. D-2A
Housing L side
Brush holder
on back side
Rear side
Fig. D-3A
Put slacked Lead wire (purple) in these places.
Brush Holder
Fix the Lead wires with
Lead wire holder.
Choke coil
Noise Suppressor
If the Equipment of Radio Interference suppression is required, put Noise suppressor and Choke coil
in the position illustrated above.
Wiring of Field lead wires (orange), (purple) to Brush holder
Field
Side window
Brush holder on Switch side
Housing L
Connect Lead wires with Brush holders
as described below.
* Brush holder on switch side:
Face the Side opening to Housing R side.
* Brush holder on back side:
Face the Side opening to Housing L side.
Housing R side
Choke Coil
P 9/ 9
Put Insulated connector
here
Fix the Lead wires with
Lead wire holder.
Pass the Field lead wires
under Brush holder.
Put Insulated connector
here.
Advertisement
