Vfp Function; Adjusting The Picture Quality - JVC HR-XVC29SU Instructions Manual

46
EN
Slide to the
right.
DVD PICTURE
Sound Effect
Using the Sound Effect function, you can change the sound field.
● This function works only for analog audio output.
1
Access the selection menu.
Press SOUND EFFECT during playback.
● The current setting appears on the TV screen.
2
Turn on the Sound Effect function.
Press SOUND EFFECT to turn on the function.
● Each time you press SOUND EFFECT, the Sound Effect
function turns on and off:
O
SOUND EFFECT:ON SOUND EFFECT:OFF
● The selection menu disappears if no operation is done for
about several seconds.
NOTES:
● The Sound Effect function works correctly only for a DVD
VIDEO disc recorded in the 5.1-channel audio format.
● You may not feel the effect of this function well depending on
the source recorded on the disc.

VFP function

— Adjusting the picture quality

The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programing,
picture tone or personal preference.
1
Access the VFP setting menu.
Press DVD PICTURE during
playback.
● The current setting appears on
the TV screen.
ENTER
SOUND EFFECT
NORMAL
GAMMA 0
0
BRIGHTNESS
0
CONTRAST
0
SATURATION
0
TINT
+ 3
SHARPNESS
OPERATIONS ON DVD DECK (cont.)
2
Select the VFP mode.
Press w e repeatedly.
● Each time you press w e, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
NORMAL
: Select this normally.
CINEMA
: Suitable for movie.
USER 1
/ You can adjust parameters that affect picture
USER 2
: appearance and store settings. Go to step 3.
To adjust picture appearance manually
3
Access USER menu.
Press w e repeatedly to select "USER 1" or "USER 2."
4
Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
● Adjust gradually and confirm picture appearance results are as
preferred.
GAMMA
Adjust this if the neutral color is bright or dark.
(–3 to +3): The brightness of dark and bright portions is
maintained.
BRIGHTNESS
Adjust this if the picture is bright or dark on
(–8 to +8): the whole.
CONTRAST
Adjust this if the objects in far and near
(–7 to +7): positions look unnatural.
SATURATION
Adjust this if the picture is whitish or blackish.
(–7 to +7):
TINT
Adjust this if the appearance of flesh tone is
(–7 to +7): unnatural.
SHARPNESS
Adjust this if the picture is indistinct.
(–8 to +8):
● VFP menu disappears and the following pop-up window
appears on the TV screen.
GAMMA
GAMMA 0
5
Adjust the parameter.
Press rt repeatedly to change the setting, then press
ENTER.
● The current VFP settings appear again.
Repeat steps 4 and 5 to adjust other parameters.
To return to the normal screen
Press DVD PICTURE.
NOTE:
The VFP setting screen disappears if no operation is done for
more than about 10 seconds.
0