Editing (Dvd Deck); Digital Audio Dubbing - JVC HR-XVC29SU Instructions Manual

EDITING (DVD DECK)

Digital Audio
Dubbing
Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch on the Remote to the
right.
Coaxial cable
(not supplied)
Rear of unit
DIGITAL AUDIO OUT
Recorder
Digital audio device
(MD deck etc.)
Player
You can dub selected audio from the DVD or Audio CD disc to a
MD etc.
However, it is not possible to dub the copy-protected disc.
Example: Dubbing to a MD
A
Make connections.
Connect the coaxial cable between the unit and the
digital audio device.
B
Place a disc and load a MD.
For the DVD deck
For details, refer to "Placing a Disc" (
For the digital audio device
Insert a MD.
C
Prepare the DVD deck for dubbing.
A Press DVD and select the audio to be dubbed.
B Search for the point where you want to start dubbing
by pressing 4 PLAY, FF 5 or 3 REW then press
8 STOP.
C Press 3 REW a little, then press 4 PLAY to start
playback.
D Press 9 PAUSE to pause playback a little before the
start point.
D
Prepare the audio device for dubbing.
Select the input mode.
E
Start dubbing.
A Press 4 PLAY to start playback on the DVD deck.
B Start recording on the audio device.
F
End dubbing.
Stop recording on the audio device. Then press 8 STOP
to stop playback on the DVD deck.
NOTES:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
You can also dub a Video CD or SVCD. Set "DIGITAL AUDIO
OUTPUT" to "PCM ONLY." (
55
EN
pg. 8).
pg. 62)