2-12
Keys, Doors and Windows
To program a new section (B):
1. Turn the ignition to ON/RUN with
the new section (A).
The vehicle must be in P (Park).
2. Press the
Driver
Information Center (DIC) button,
located on the steering wheel,
until the Customize Options
page is reached.
3. Press the thumbwheel
to enter the vehicle
personalization menu.
4. Scroll to Remote Key and select
it using the thumbwheel.
5. Scroll to Program and select it
using the thumbwheel.
6. Press
and
on the new
section (B) at the same time
for approximately 15 seconds,
until you hear two beeps.
7. Repeat Step 6 for all other
transmitters, including
transmitters that require
programming or ones previously
programmed to the vehicle. Any
transmitter not reprogrammed
will be erased.
8. Turn the ignition to LOCK/OFF.
9. Join sections (A) and (B) until
they click.
Do not join the two key sections
until programming is complete.
Do not leave the key or device
that disarms or deactivates the
theft-deterrent system in the vehicle.
Exterior Mirrors
Power Mirrors
Center Console Control Shown,
Driver Door Control Similar.
To adjust the mirrors:
1. With the ignition on, move the
selector switch to the left or right
to choose either the driver or
passenger side mirror.