Remote Vehicle Start - Chevrolet Caprice 2011 Owner's Manual

Remote Vehicle Start

With this feature the engine can be
started from outside of the vehicle.
Starting the Engine Using
Remote Start
To start the engine using the remote
start feature:
1. Press on the RKE transmitter.
2. Press and hold for about
two seconds. The turn signal
lamps will briefly flash to confirm
the vehicle has been started.
The parking lamps will turn on
and remain on as long as the
engine is running. The vehicle's
doors will be locked.
3. After entering the vehicle during
a remote start, insert and turn
the key to ON/RUN to drive the
vehicle.
After a remote start, the engine
will automatically shut off after
10 minutes unless a time extension
has been done or the vehicle's key
is inserted into the ignition switch
and turned to ON/RUN.
Shutting the Engine Off After a
Remote Start
To manually shut off the engine
after a remote start, do any of the
following:
Press until the parking lamps
turn off.
Turn on the hazard warning
flashers.
Insert the vehicle's key into the
ignition switch and turn the
switch to ON/RUN and then
back to LOCK/OFF.
See Remote Vehicle Start on
page 2 4.
In Brief
Seat Adjustment
Manual Seats
To adjust a manual seat:
1. Lift the bar to unlock the seat.
2. Slide the seat to the desired
position and release the bar.
3. Try to move the seat back and
forth to be sure the seat is
locked in place.
See Seat Adjustment on page 3 3
for more information.
1-7