Wiring Provisions For Headlamp And Rear Flashing System - Chevrolet Caprice 2011 Owner's Manual

Special Equipment Options 15-7
Wiring Provisions for
Headlamp and Rear
Flashing System
An in-line connector in the forward
lamp harness permits installation of
a compatible flasher module for the
exterior lamps emergency flashing
system. The in-line flasher module
connector is located at the right end
of the upper radiator support and
includes two wiring circuits to the
front compartment footwell.
A dark green with red stripe wire is
intended for customer connection to
switched 12-volt power to activate
the flasher module. A dark blue with
yellow stripe wire permits optional
separate control of the headlamp
flashing and rear lamp flashing.
Separate control of the rear lamps
flashing requires opening the dark
blue and red control circuit at the
in-line module connector and
application of switched vehicle
ground to the control wire in the
forward compartment.