Operation - LG LS-J0761CLCM Service Manual

Operation

Name and Function-Remote Control(C/O Model)
Remote Control
Signal transmitter
Transmits the signals
to the room air conditioner.
4
3
ON
6
7
SET
8
15
13
Signal transmitter
5
1
2
OFF
9
10
CANCEL
11
PLASMA(or )
12
14
START/STOP BUTTON
1
Operation starts when this button is pressed and stops
when the button is pressed again.
ROOM TEMPERATURE SETTING BUTTONS
2
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR
3
Used to select fan speed in four steps
low, medium, high, or CHAOS.
JET COOL
4
Used to start or stop the speed
cooling. (Speed cooling operates
super high fan speed in cooling mode.)
CHAOS SWING BUTTON
5
Used to stop or start louver movement and
set the desired up/down airflow direction.
ON/OFF TIMER BUTTONS
6
Used to set the time of starting and stopping operation.
TIME SETTING BUTTONS
7
Used to adjust the time.
TIMER SET/CANCEL BUTTONS
8
Used to set the timer when the desired time is obtained
and to cancel the Timer operation.
SLEEP MODE AUTO BUTTON
9
Used to set Sleep Mode Auto operation.
AIR CIRCULATION BUTTON
10
Used to circulate the room air without cooling or heating
(turns indoor fan on/off).
ROOM TEMPERATURE CHECKING BUTTON
11
Used to check the room temperature.
PLASMA(OPTIONAL)
12
Used to start or stop the plasma-purification function.
NEGATIVE ION(OPTIONAL)
Used to generate negative ion.
HORIZONTAL AIRFLOW DIRECTION CONTROL
13
BUTTON (NOT ON ALL MODELS)
Used to set the desired horizontal airflow direction.
RESET BUTTON
14
Used prior to resetting time or after replacing batteries.
OPERATION MODE SELECTION BUTTON
15
Used to select the operation mode.
-37-