LG Flat Panel Monitor User Manual

Hide thumbs Also See for Flat Panel Monitor:


The Monitor has an active matrix TFT (Thin-Film Transistor) LCD (Liquid
Crystal Display).
This monitor is designed for use in small working areas or for those who need
more working space on the desk.
The monitoris a 15 inch (15 inches viewable) intelligent micropro-cessor based
USB(Universal Serial Bus) ports at the back of the monitor are prepared for the
USB cable and hub. You can easily and flexibly connect USB - designed
devices-such as a mouse, keyboard or printer- to the monitor for true Plug and
Play function.
Digitally controlled auto-scanning is done with the micro-processor for horizontal
scan frequencies between 31 and 61kHz, and vertical scan frequencies
between 56 - 75Hz. The microprocessor-based intelligence allows the monitor
to operate in each frequency mode with the precision of a fixed frequency
This monitor provides audio function.Thanks to built in audio function in the
speaker,you can easily separate speakers from the monitor and place them
where you want.
You can adjust the height of the screen and also rotate it 90
(* For detailed information, please refer to the CD provided with the manual.)
We accomplished to adapt the advanced design and technology to the monitor.
Soft touch buttons on the front panel are simple and allow you to conveniently
adjust a variety of image controls. The absolute flat screen and screen surface
treatment eliminate distracting glares.
Plug and play capability if supported by your system.
This monitor has DDC 2B function.*
Compliant with the following regulated specifications :*
- Swedish TCO'99
For detailed information, please refer to the Reference Guide provided .


Table of Contents

Summary of Contents for LG Flat Panel Monitor

  • Page 1 Introduction The Monitor has an active matrix TFT (Thin-Film Transistor) LCD (Liquid Crystal Display). This monitor is designed for use in small working areas or for those who need more working space on the desk. Features The monitoris a 15 inch (15 inches viewable) intelligent micropro-cessor based monitor.
  • Page 2: Connecting The Monitor

    Connecting the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: Power off both the monitor and computer. To adjust height of your monitor, unlock the stand lock on top of the stand. Push the stand lock at arrows shown(figure A).
  • Page 3 Connecting the Monitor Connection the Audio Connect the speaker as described in below picture. Connect the one end of Audio DC power cable,which is attached on the speaker to AUDIO DC OUT connector and the other end to DC 12V connector on the back of the speaker.Then connect the audio cable port which is directly connected to the speaker to AUDIO L-OUT port Connect the audio cable from the Speaker’s AUDIO IN port...
  • Page 4: Making Use Of Usb (Universal Serial Bus)

    USB ports(both the upstream and downstream) of the monitor. IMPORTANT: These USB connectors are not designed for use with high-power USB devices such as a video camera, scanner, etc. LG recommends connecting high-power USB devices directly to the computer...
  • Page 5: Location And Function Of Controls

    Location and Function of Controls Front View Speaker SOUND SOUND Power Button OSD Button Power Indicator Buttons AUTO/SET Button Rear View Stand Lock DC Power Connector Audio DC Power Cable Audio Cable Audio Buttons USB downstream port USB upstream port...
  • Page 6: Front Panel Controls

    Control Panel Function Front Panel Controls AUTO/SET Button OSD Button Power Button Power Indicator Button Control Function OSD Button Use this button to enter or exit the on screen display. Use these buttons to choose or adjust items in the on Button screen display.
  • Page 7: On Screen Display (Osd) Control Adjustment

    On Screen Display (OSD) Control Adjustment Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following section is an outline of the available adjustments and selections you can make using the OSD.
  • Page 8: On Screen Display(Osd) Selection And Adjustment

    On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD Adjust Description Brightness...
  • Page 9 On Screen Display(OSD) Selection and Adjustment OSD Adjust Description CLOCK To minimize any vertical bars or TRACKING stripes visible on the screen background.The horizontal screen CLOCK size will also change. PHASE To adjust the focus of the display. PHASE This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
  • Page 10: Video Memory Modes

    Video Memory Modes The monitor has 30 memory locations for display modes, 14 of which are factory preset to popular video modes. Display Modes (Resolution) Display Modes (Resolution) Horizontal Freq.(kHz) Vertical Freq.(Hz) 31.47 640 x 350 31.47 720 x 400 31.47 640 x 480 35.00...
  • Page 11: Troubleshooting

    Troubleshooting Check the following before calling for service. Display Position is incorrect. Push the AUTO/SET Button. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. On the screen background, vertical bars or stripes are visible. Push the AUTO/SET Button.
  • Page 12: Specifications

    Specifications Display Type 15 inch (38.1cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Viewable Size 15 inch (38.1cm) Pixel pitch 0.3 x 0.3mm Horizontal Freq. 31kHz - 61kHz (Automatic) Sync Input Vertical Freq. 56Hz - 75Hz (Automatic) Input form Separate, TTL, Positive/Negative Signal input 15 pin D-Sub connector Display Area...

Table of Contents