LG LS-J0761CLCM Service Manual page 24

2) Connection of Pipings
1. Remove the installation plate
• Pull the two '∆' marked portion of bottom of the
chassis and pull the installation plate out of chas-
sis.
2. Route the drain hose and the indoor tubing.
For right rear piping
3. Insert the piping, the connecting cables and the
drain pipe through the piping hole on the wall.
4. Connect the piping and the indoor tubing, and
drain hose and drain pipe.
• Don't connect the cable to the indoor unit.
Pipe Size
Liquid Side (1/4")
Gas Side (3/8")
Gas Side (1/2")
• Wrap the insulation material around the connect-
ing portion.
• Glue up the connection portion of drain hose and
drain pipe.
Torque
1.8kg . m
4.2kg . m
5.5kg . m
-24-
Installation plate
Pull
Indoor
Drain hose
Indoor unit tubing Flare nut
Spanner
Torque wrench
Plastic bands
Drain hose Drain pipe
Adhesive
Pull
Outdoor
Connecting cable
Connecting
piping
Drain pipe
Pipings
Insulation material