Jackson Systems Wireless Comfort WCT-32 User Manual page 2

Factory Schedule
The thermostat is shipped with the following
factory schedule.
Program Start Time
Morning 6:00AM
Day 8:00AM
Evening 5:00PM
Night 10:00PM
Warning!
The thermostat is battery powered and the
batteries should be changed every year or when
the low battery warning is displayed.
Selecting System
Off, Auto, Heat, Cool or EM HT
Press the System key to select Off, Auto
(heating and cooling) Heat (heating), Cool
(cooling) or EM HT (emergency heating if your
system is a heat pump).
In Auto the thermostat will call for heating or
cooling based on the heating and cooling set
temperatures and the indoor temperature. To view
both the heating and cooling set temperature in
Auto mode, press and hold the NEXT key. The
LCD will display Heat Set To and then Cool Set
To along with with the corresponding set
temperature. Use the Up and DOWN keys to
change the set temperature when the proper
mode is displayed.
Inside
Th
NEXT
MENU HOLD
Selecting Fan
Auto or Cont
Press the Fan key to select Auto or Cont
(continuous) fan operation. In Auto the
thermostat activates the fan during heating and
cooling calls. In Cont the fan runs continuously
to circulate air.
Setpoint
Heating Cooling
70F 78F
62F 82F
70F 78F
62F 82F
System
Mode
Heat
Set To
HEAT
AUTO
AM
ENTER
MENU HOLD
Selecting Schedule or
Permanent Hold
Press the Hold key to switch between Hold,
Hold Permanent and Schedule. Schedule
operation automatically changes the heating
and cooling temperature settings at the four
scheduled times– Morning, Day, Evening and
Night.
When in Schedule operation, adjusting the
heating or cooling temperature using the Up
and Down keys switches to the Hold mode.
After 3 hours the thermostat returns to the
Schedule mode. Press the Hold key at any
time to return to Schedule mode.
The Hold Permanent mode maintains the
heating and cooling temperatures indefinitely
until the Hold key is pressed which will return
the thermostat to the Schedule operation.
Schedule Day
MENU HOLD
HOLD Key
Setting the Heating and
Cooling Temperature
Press the Up or Down key to change the heating
or cooling temperature. Press the Next key to
switch between the heating and cooling
temperature.
2
Fan
Mode
Set To
Inside
HEAT
Th
AUTO
AM
NEXT
ENTER
Schedule
Mode in
Heat Day
Set To
Schedule
Inside
HEAT
Th
AUTO
AM
NEXT
ENTER