Http Authentication; Authentication Id; Authentication Password; Proxy Server Settings - Panasonic KX-TGP500 Administrator's Manual

Value Range
Default Value
Configuration File Reference

3.4.3.2 HTTP Authentication

Authentication ID

Description
Value Range
Default Value

Authentication Password

Description
Value Range
Default Value

3.4.3.3 Proxy Server Settings

Enable Proxy

Description
Value Range
Default Value

Proxy Server Address

Description
Document Version 2013-02
Max. 40 characters
Note
•
You cannot leave this field empty.
•
If "{mac}" is included in this field, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this field, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this field, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
HTTP_USER_AGENT (Page 171)
Specifies the authentication ID required to access the HTTP server.
Max. 64 characters (except ", &, ', :, <, >, and space)
Not stored.
Specifies the authentication password used to access the HTTP server.
Max. 64 characters (except ", &, ', :, <, >, and space)
Not stored.
Selects whether to use the proxy server.
•
Yes
•
No
No
Specifies the IP address or FQDN of the proxy server.
3.4.3 HTTP Client Settings
Administrator Guide 73