Setting Vr-716 To The Program Timer Standby Mode - JVC VR-716E Instructions Manual

Connecting to a PC – Routine Uses of the Web Browser – (continued)

Setting VR-716 to the Program Timer Standby Mode

1.
Click
2.
Click
3.
To undo the Timer Standby mode, click
88
z z
1
Click [TIMER MODE].
1 Click the [ON] button.
1
Click the [OFF] button.
Note
• Timer mode cannot be executed if none
of the Timer Program execution mode is
activated and sensor setting is not per-
formed.
Notes
• Operations after setting the [TIMER
MODE] to [OFF] are reflected on the [Re-
lease Timer operation] screen.
☞ Page 88
• Alteration of settings and termination of
recording related to [Release Timer opera-
tion] is not possible via the Web browser.
☞ Page 54
Caution
• The [OFF] button is displayed when the
[TIMER STANDBY MODE] is activated.
Double-check the [Release Timer opera-
tion] before using.