Replacing The Batteries - Franklin Spanish Master IC-122 User Manual

Replacing the Batteries

The DBS-1 and DBS-2 use four 3-volt, CR2032
lithium batteries. The DBS-2D uses four 1.5-volt,
AA batteries.
1. Have new batteries ready.
2. Turn the Digital Book System off.
3. Slide the battery cover off the back.
4. Remove all the batteries.
5. Place new batteries in the cavities, with the
+'s oriented correctly. (In the DBS-1 and DBS-
2, the +'s should face up.)
6. Replace the battery cover.
Battery Precautions
When you replace batteries, follow these
precautions to avoid erasing information on
your installed digital books:
• Replace the batteries before they lose
power;
• Once batteries have been removed,
install new ones within two minutes;
• Don't mix old and new batteries;
• Never remove batteries with the unit on.
Appendixes
29