Table of Contents
Advertisement
CMO Operations & Logistics
Multimedia Creation & Support
Bochum / Germ
any
19. BLUETOOTH & INFRARED TEST
Bluetooth test
You need another Bluetooth device (e.g. 6230) to do a GoNoGo test.
Make sure that Bluetooth is activated in the reference unit. The distance of the devices should be not more than
5m from each other.
Infrared test
You need another infrared device (e.g. 6230) to do a GoNoGo test. The infrared windows of the devices must be
directed to each other and should have a distance of approximate 15 cm. Make sure that infrared is activated in
receiver device.
Warning: Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This
device is a Class 1 Laser product.
Test unit
Settings on the test unit:
Press the red End key to reach the Home Menu
•
•
Select Names and select Details for an entry
If phone and SIM memory is empty, create one new entry.
•
Select Options
•
Select Send bus. card
•
Select Via infrared
A) - for infrared test: Select Via infrared
If sending of business card fails, make sure again those infrared windows are directed to each other and
infrared is activated in reference unit. Then try again sending.
Test was successful, if you get the message "Business card received" on the Reference unit.
You will not get a confirmation on sender device.
B) - for Bluetooth test: Select Via Bluetooth
Search window appears and shows all Bluetooth units in range.
Choose one unit and press Select
Press Accept on the Reference unit.
Test was successful, if you get the message "Business card received" on the Reference unit.
•
Press red End key to reach the Home Menu
Note: If the Bluetooth is activated, switch it off!
Service Manual 6101/6102/6103/6102i Level 1&2
PAGE 25 (28)
CONF
IDENTIAL
Reference unit, /infrared activated
Copyright © 2005-2006 Nokia Corporation. All rights reserved.
Approved 3.0
MGR
11.01.2006
Advertisement
Table of Contents
