Nokia 9101 Service Manual page 16

CMO Operations & Logistics
Multimedia Creation & Support
Bochum / Germany
7.) First place the SRT-6 between the A-Cover and
B-Cover and shift it carefully along the edge, then
open the clip by pushing the tip of SRT-6 carefully.
9.) Remove the A-Cover.
11.) First lift the UI Module carefully to disconnect it
from the Coax Cable and then remove it from the
B-Cover.
13.) Protect the inner side of the window with a film.
Service Manual 6101/6102/6103/6102i Level 1&2
PAGE 16 (28)
CONFIDENTIAL
8.) Do the same procedure on the other side.
10.) The UI Module is attached to the B-Cover with
two snaps. Use SRT-6 to open the snaps.
For assembly only!
12.) Press on the UI Module carefully to close the
Board-to-Board connector.
14.) Also protect the LCD Display.
Copyright © 2005-2006 Nokia Corporation. All rights reserved.
Approved 3.0
MGR
11.01.2006