Nokia 9101 Service Manual page 13

CMO Operations & Logistics
Multimedia Creation & Support
Bochum / Germany
9.) Remove the Antenna.
11.) Place the SRT-6 between D-Cover and the C-Cover
and shift it carefully along the edge.
13.) Remove the D-Cover.
15.) Now, remove the IHF-Lid Assembly.
Service Manual 6101/6102/6103/6102i Level 1&2
PAGE 13 (28)
CONFIDENTIAL
10.) Unscrew the four, Torx Plus
shown order. For assembly, use the same order and a
Torx Plus size 6 driver with a torque setting of
®
17Ncm.
12.) Do the same procedure on the other side.
14.) Open the clip of the IHF-Lid Assembly.
16.) First turn the Volume Key and then remove it as
shown in the picture.
Copyright © 2005-2006 Nokia Corporation. All rights reserved.
Approved 3.0
MGR
11.01.2006
size 6 screws in the
®