Denon AVR-X3100W Owner's Manual page 192

Contents Connections
o Surr. Back
Set the presence, size and number of surround back speakers.
Large:
Small
(Default):
None:
2 spkrs
(Default):
1 spkr:
When "Assign Mode" setting is "Surround Back", you can make this setting.
(v p. 190)
Front panel Display
Playback
Use a large speaker that can adequately
play back very low bass frequencies.
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Select when the surround back speakers
are not connected.
Use two surround back speakers.
Use only one surround back speaker.
Connect to the L terminal to SURROUND
BACK when this setting is selected.
Rear panel
Settings
o Front Height
Set the presence and size of the front height speakers.
Large:
Small
(Default):
None:
When "Assign Mode" setting is "Front Height", you can make this setting.
(v p. 190)
o Front Wide
Set the presence and size of the front wide speakers.
Use a large speaker that can adequately play back very low
Large:
bass frequencies.
Small Use a small speaker that has inadequate playback capacity
(Default): for very low bass frequencies.
None: Select when the front wide speakers are not connected.
0 When "Assign Mode" setting is "Front Wide", you can make this setting.
(v p. 190)
192 Remote
Tips Appendix
Use a large speaker that can adequately
play back very low bass frequencies.
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Select when the front height speakers are
not connected.
Index