Denon AVR-X3100W Owner's Manual page 19

Contents Connections
q w e rt y
A Rod antennas for Bluetooth/wireless LAN
Stand this antenna upright when connecting to a network via wireless
LAN, or when connecting to a handheld device via Bluetooth.
(v p. 54)
90°
320°
Front panel Display
Playback
u q i
90°
320°
Rear panel
Settings
The antenna clip can be removed from the rear panel.
A Rotate the antenna clip 90 degrees to the left.
B Pull the antenna clip out towards yourself.
0 The antenna clip is needed when transporting this unit. Keep it in a safe place.
0 Attach the antenna clip by following the steps for removing it in reverse.
B RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner's manual of the home
automation controller for more information about serial control of this
unit.
C Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
(v p. 43, 47)
D NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN
network. (v p. 53)
E REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room. (v p. 55)
F Video connectors (VIDEO)
Used to connect devices equipped with video connectors.
(v p. 46, 47)
G HDMI connectors
Used to connect devices equipped with HDMI connectors.
(v p. 42, 43, 46, 47)
H AC inlet (AC IN)
Used to connect the power cord. (v p. 57)
19 Remote
Tips Appendix
Index