Denon AVR-X3100W Owner's Manual page 14

Contents Connections
q w e r
SOURCE SELECT
TUNER ZONE2
PRESET CH ON/OFF
u ioQ0 Q 1
PHONES
A Power operation button (X)
Used to turn the power of the MAIN ZONE (room where this unit is
located) on/off (standby). (v p. 59)
B Power indicator
This is lit as follows according to the power status:
White: Power on
0
Off: Normal standby
0
Red:
0
When "HDMI Pass Through" (v p. 167) is set to "On"
0
When "HDMI Control" (v p. 168) is set to "On"
0
When "IP Control" (v p. 202) is set to "Always On"
0
Front panel Display
Playback
t
MASTER VOLUME
ZONE2
1 CBL/SAT 2 Blu-ray 3 MEDIA 4 ONLINE
DIMMER STATUS PLAYER
SOURCE
QUICK SELECT
AUX 1 - HDMI SETUP MIC
Rear panel
Settings
y
C SOURCE SELECT knob
This selects the input source. (v p. 59)
D Remote control sensor
This receives signals from the remote control unit. (v p. 8)
E Display
This displays various pieces of information. (v p. 16)
F MASTER VOLUME knob
This adjusts the volume level. (v p. 60)
G Tuner preset channel buttons
(TUNER PRESET CH +, –)
These select preset broadcast stations. (v p. 78)
H ZONE2 ON/OFF button
This turns the power of ZONE2 (separate room) on/off. (v p. 144)
I ZONE2 SOURCE button
This selects the input source for ZONE2. (v p. 144)
J DIMMER button
Each press of this switches the brightness of the display. (v p. 210)
K STATUS button
Each press of this switches the status information that is shown on the
display. (v p. 63)
14 Remote
Tips Appendix
Index