Hardware Overview - D-Link AC750 User Manual

Section 1 - Product Overview
1
3
D-Link DIR-510L User Manual

Hardware Overview

...ON/OFF/CHARGER
1
...Switch
2
...WPS.Button
2
3
...Reset.Button
4
...USB.Port.1.A
4
5
..Power/Status.LED
5
6
6
...Battery.LED
7
7
...USB.Port.0.5.A
Slide the switch to ON to operate the unit in router modes.
Slide the switch to CHARGER to charge devices connected via USB.
Press the WPS button to automatically connect additional devices to the unit securely.
Pressing the Reset button restores the router to its original factory default settings.
Connect a 3G/4G USB adapter to use Mobile Router Mode to share your Internet broadband.
Connect a USB drive to share locally using mydlink SharePort and SharePort Web Access.
Connect a device (high-power support) via USB cable to charge it.
Green (Solid) The device is connected and working properly.
The device is currently connecting via WPS.
Green (Blinking)
The device is booting or resetting.
Orange (Solid)
Orange (Blinking) The device cannot connect to the Internet or is in recovery mode.
The system is defective.
Red (Solid)
Off The device is turned off or in charging mode.
Green (Solid) Battery capacity is 80% or more.
Orange (Solid) Battery capacity is between 15% and 80%.
Red (Solid) Battery capacity is 15% or less.
Red (Blinking) Battery is defective.
Charging is complete (connected to power adapter) or the device
Off
is out of battery.
Connect a USB drive to share locally using mydlink SharePort and SharePort Web Access.
1
2
5