Gs1 Composite Code Message Length; Upc/Ean Version; Gs1 Emulation - Honeywell Stratos 2700 User Manual

UPC/EAN Version

Scan the UPC/EAN Version On bar code to decode GS1 Composite symbols that have a U.P.C. or an EAN linear compo-
nent. (This does not affect GS1 Composite symbols with a GS1-128 or GS1 linear component.) Default = UPC/EAN Ver-
sion Off.
UPC/EAN Version On

GS1 Composite Code Message Length

Scan the bar codes below to change the message length. Refer to
information. Minimum and Maximum lengths = 1-2435. Minimum Default = 1, Maximum Default = 2435.
Minimum Message Length

GS1 Emulation

The scanner can automatically format the output from any GS1 data carrier to emulate what would be encoded in an equivalent
GS1-128 or GS1 DataBar symbol. GS1 data carriers include UPC-A and UPC-E, EAN-13 and EAN-8, ITF-14, GS1-128, and
GS1-128 DataBar and GS1 Composites. (Any application that accepts GS1 data can be simplified since it only needs to recog-
nize one data carrier type.)
If GS1-128 Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8, EAN13) are expanded out to 16 digits. If the AIM ID
is enabled, the value will be the GS1-128 AIM ID, ]C1 (see
If GS1 DataBar Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8, EAN13) are expanded out to 16 digits. If the AIM
ID is enabled, the value will be the GS1-DataBar AIM ID, ]em (see
If GS1 Code Expansion Off is scanned, retail code expansion is disabled, and UPC-E expansion is controlled by the
Expand (page 9-37) setting. If the AIM ID is enabled, the value will be the GS1-128 AIM ID, ]C1 (see
page A-1).
9 - 66
Message Length Description
Symbology Charts on page A-1).
Symbology Charts
* Off
* UPC/EAN Version Off
(page 9-1) for additional
Maximum Message Length
on page A-1).
Symbology Charts
UPC-E0
on