Skirt And Bubble Attachment - American Dynamics SpeedDome Ultra Camera Installation And Service Manual

Skirt and Bubble Attachment

The following procedures show you how to attach a
skirt and bubble to the outdoor SpeedDome hous-
ing.
Procedure
Referring to Figure Chapter 3-9:
1. Push pins of the skirt [a] into their respec-
tive receptacles and snap the skirt into
place.
2. Thread the three screws [b] of the bubble [c]
into their respective mounting holes. Tight-
en the screws to secure.
Figure Chapter 3-9. Attaching the skirt and
bubble to the outdoor SpeedDome housing
a
c
b
SPEEDDOME ULTRA
3-8
OUTDOOR INSTALLATION