Videocon DIGI NEMO Owner's Manual page 5

DETERGENT Indicators
These are the spoon ? This indicator shows remained
time during washing.
indications of the
DETERGENT volume.
(E.g.) Remaining time is 20 minutes
Detailed operation
REMAINING
TIME
please refer to page9.
?
When setting SELECT, the digital
9
display indicates time or times.
(e.g.) Twice Water Save Rinse
RINSE
SW65BSP
6 .5 K g
WATER LEVEL Button
CHILD LOCK Function
? You can choose the appropriate
water level that matches the load
size.
? You can set CHILD LOCK function.
Refer to CHILD LOCK FUNCTION
at page13.
? Different water levels for washing
rinsing optional.
Detailed operation please refer
to Page 13.
NAMES AND FUNCTIONS OF CONTROL PANEL
TIMER And PRESET Indicators
? This indicator shows when the
washing is finished during
presetting.
(E.g.) Finish washing 2 hours later
PRESET
? When abnormal conditions occur,
the indicator will indicate warning.
(E.g.) Water does not flow
PROCESS Button
AndSET Button
? The PROCESS Button can
be used to set a variety of
wash programs.
? The SET button can be used to set PRESET,
SOAK, WASH time, RINSE time and SPIN time.
Detailed operation please refer to Page 10.
? Press "SET" button to adjust water power during
washing or rinsing.
Detailed operation please refer to Page 13.
? Water power fun tion could not be set for c
DELICATE or BLANKET course.
TEMPERAT.
COURSE Button
To choose the washing course, To turn the power on, press the POWER ON/OFF.
When you want to turn off the power, press the
press COURSE button.
POWER ON/OFF button again.
When washing has finished, the power will be turned
NOTE:
off in 5 seconds automatically.
If you choose the NORMAL,
HEAVY DUTY, CUSTOM
NOTES:
course, the washer will
? If you want to change the wash program, press the
automatically begin the
POWER ON/OFF button and then on it again.
NEURO & FUZZY operation.
? If you leave the washer turning on without starting
the operation, the power will be turned off in 10
minutes by itself.
START/PAUSE Button
This button can be used for starting the
washer operation.
This button can also be used to temporarily
stop the washer operation.
To restart the washer operation, press the
START/PAUSE button again.
NOTES:
This is not a cancel button. If you want to
delete the End Buzzer, press the
START/PAUSE button and hold down for
about 4 seconds until beeping stops.
See page 13.
POWER ON/OFF Button